How to measure shower room partition size?

1. For the curved shower room partition, you only need to measure the peripheral dimensions of the stone base on both sides. Especially for screen shower rooms with wall-to-wall aluminum materials, the actual results will generally be reduced by 5mm; while those with glass clips will actually be reduced by 2mm. You must pay attention to these two details, and there is no need to reserve too much size.

2. During the entire actual measurement, some house types will tilt or sink due to decoration and other reasons. At this time, the measurement must record the specific width of the upper, middle and lower positions, and select the smallest size to customize the shower room.

3. It is inevitable to encounter strange house types during measurement, such as: doors need to be reinforced, tie rods need to be lengthened, etc. If you encounter a type of special situation, you need to measure the size of the abnormal area and determine the correct door opening direction and door frame size.