Why is it that for the same shower room, other people's shower rooms are as clean as new after three to five years of use, but yours becomes dirty in half a year? Let the editor of Youpu Bathroom Shower Room Brand teach you how to clean/maintain the shower room correctly.

1. Please rinse the glass with shower water after each shower to minimize the residual foam; if there are water droplets remaining on the glass surface, wipe all glass and metal parts with a soft dry cloth.

2. If there is dust on the surface, rinse it with water first, and then wipe it clean with a clean soft cotton cloth/towel.

3. When there are stains on the surface, spray neutral detergent on the stained area, wipe it gently with a soft cotton cloth/towel and then rinse it with water.

4. For cleaning of stainless steel profiles, small area stains can be cleaned with toothpaste, and larger area stains can be cleaned with talcum powder, Jieerliang, and 99 wax.

5. For areas with hard water, where scale is easy to form, you can mix equal amounts of white vinegar and water and spray to remove scale and maintain the easy-to-clean effect.

6. Do not use strong acid or strong alkaline chemicals for cleaning to avoid damaging the surface gloss.

7. Do not use any abrasive or rough material cleaning products to avoid scratching the surface, especially glass.

8. Install the product in a well-ventilated area to avoid direct sunlight or exposure.

9. Clean the pulleys and slide rails regularly and add lubricant to avoid vigorously pulling the glass when it gets stuck.

10. Regularly adjust the adjusting screw of the pulley slider. If the pulley makes abnormal noise or is seriously worn, notify the seller for maintenance and replacement.

11. Wipe door clips, wall clips and other hardware with a microfiber cloth to keep them clean and dry to avoid surface scratches. If you find any abnormal noise when opening and closing the door, you should notify the shower room manufacturer for maintenance.